Cable length: approx. 20 cm
Item from plant dismantling.
Item from plant dismantling.
Type Main unit Light source Red LED Sensitivity setting/mode selection 8-turn trimmer (with indicator), FINE/TURBO (selector switch) Response time 250 μs (FINE)/500 μs (TURBO) Operating mode LIGHT-ON/DARK-ON (selector switch) Display indication Output: Red LED, Stable operation: Green LED Timer function ON delay: 40 ms / OFF delay: 40 ms / Timer OFF (selector switch) Input ― Control output PNP open collector, max100 mA (max40 VDC), residual voltage: max1 V Stability output PNP open collector, max50 mA (max40 VDC), residual voltage: max1 V*1 Protection circuits Reverse polarity protection, overcurrent protection, overvoltage protection Expansion unit Up to 16 expansion units can be connected to a single main unit (total 17 units).*2 Mutual interference suppression FINE: 4, TURBO/SUPER: 8 Ratings Power voltage 12 to 24 VDC ±10% with max10% residual ripple (peak-to-peak) Power consumption 35 mA or less Environmental resistance Ambient lighting Incandescent lamp: maximum 10,000 Lux, Sunlight: maximum 20,000 Lux Ambient temperature -10 to 55°C, no freezing*3 Operating humidity 35 to 85 % RH (no condensation) Vibrations 10 to 55 Hz, double amplitude: 1.5 mm, 2 hours each in X, Y, and Z axis Shock resistance 500 m/s2 in X, Y, and Z direction, 3 times each Housing material Polycarbonate Weight Approximately 75 g According to manufacturer.
| Technical characteristic | Value |
|---|---|
| Condition | Used |
| Age rating | No age restriction |
| Model | FS-M1P |
| Manufacturer | KEYENCE |
| Content | 1 piece |
| Weight | 200 g |
| Item ID | 1234572463 |
| Item ID | 1234572463 |
KEYENCE
KEYENCE FS-M1P PNP fiber optic sensor amplifier main unit
Item number VN-2947
EAN
Condition Used
Available quantity
EUR 17.00
*
Content
1 piece
Unit price
€17.00 / piece
immediately available
* Incl. VAT excl. Shipping
Similar articles
KEYENCE area detection laser sensor LV-H42 + measurement amplifier LV-21AP
€88.00 *
* Incl. VAT
excl.
Shipping